The Trend Of Energy Saving And Environmental Protection Of Printing And Dyeing Equipment Is Obvious.

< p > > a href= "http:// www.sjfzxm.com/news/index_c.asp" > pretreatment < /a > is the most water consuming link in printing and dyeing process. The implementation of less water technology, reducing water consumption and chemical consumption has become the main trend of development. In addition, printing and dyeing equipment manufacturers also pay more attention to controlling dyeing bath ratio in dyeing process, for example, through precise dyeing flow control and cloth separation technology to reduce dyeing bath ratio, which greatly improves the energy saving and environmental protection characteristics of the equipment.

< /p >

< p > the TA250 high temperature low bath overflow dyeing machine developed by Zhejiang Titan Limited by Share Ltd is a brand new energy saving and environment-friendly dyeing machine.

The machine adopts unique double circulation nozzle design, and the front and back nozzles are used together to make the fabric run freely under low tension condition. Double track structure is used, the fabric is stacked and stacked orderly and orderly, which greatly improves the volume of cloth, and the maximum capacity of each pipe can reach 300 kilograms. With the technology of precise dye flow control and liquid separation, the dye bath ratio (bath ratio 1: 4.7) is greatly reduced, water consumption is reduced, and the real meaning of energy saving and environmental protection is realized.

< /p >

< p > Taiwan East Geng < a href= "http:// www.sjfzxm.com/news/index_c.asp" > dyeing and finishing machinery < /a > Co., Ltd. and Hangzhou Donglin introduced the new modified RUV2 low bath ratio overflow dyeing machine using a pure overflow a href= "http:// www.sjfzxm.com/news/index_c.asp" > dyeing technology < > > no need to adopt "electricity + air" mode to reduce bath ratio.

The machine has a new constant liquid ratio control device, which can improve the stability of dyeing quality and reduce the difference of dyeing cylinder.

The design of the new unique two-way control device can fully and evenly fill the tank with the cloth, and not waste the slot space, thereby increasing the production volume.

< /p >

< p > in addition, this dyeing machine has increased the amount of cloth produced under the dyeing and finishing plant from the design, and has achieved the goal of reducing the ratio of water to bath, reducing the consumption of electricity, chemical products and energy. It not only meets the current requirements of energy conservation and emission reduction, but also makes dyeing and finishing plants more competitive in energy resources.

< /p >

The MONTEX 6500 setter, which is exhibited by Heng Tian Li Xin company, adopts PLC control and Qualitex 750 software, which can be used for remote technical support, production process control is more intelligent and stable. Ergonomics and humanization are adopted in the design. The TWINAIR double air duct and heat recovery system are also equipped to further reduce energy consumption and compare the capacity contrast. For different fabric varieties, there are many kinds of nozzle types to choose from, and the process adaptability is wide, which is more in line with the environmental protection concept of energy conservation and consumption reduction. P

The Fuji MONFORTEX 8000 pre shrinking machine adopts lower rubber blanket pressure to reduce the remaining shrinkage rate, and the design consumption of the equipment is reduced by 40% compared with that of the previous generation.

< /p >